NANO04 VD (cod. 10004VDX08)
10004VDX08
New product
A line of power and control boards for refrigeration systems with three-phase compressors up to 2,5 HP that provide complete cold room management. You can control the room light and the stand-by system using the buttons on the thermostat. Integrated PEGO thermo-regulator controls compressor, ventilation, defrosting and light.
Data sheet
| Main Function | Full cold room management |
| User interface | Red led small (Nano series) |
| Datalogger | No |
| General protection | Fuses |
| Compressor - type | Three phase |
| Compressor - thermal protection | 5.5 - 8.0 A |
| Product type | Electrical panel with electronics |
| Condenser - type of fans | Single phase |
| Condenser - Total fan power | up to 800 W |
| Condenser - separated fans | No |
| Evaporator- fans phases | Single phase |
| Evaporator - fans power | 250 W |
| Defrost - type | With heaters / off-cycle |
| Defrost - heaters phases | Single phase |
| Defrost - heaters power | 1200 W |
| Light - power | 800 W (AC1) |
| Other characteristics | Door switch, Compressor oil heater, RTC defrost (clock), Night mode function, Telenet Pego supervision |
More info
• Designed to provide an immediate start-up and easy maintenance.
• Direct control of compressor, condenser fans, compressor oil element, defrost elements, evaporator fans, solenoid valve, room light and all standard-compliant electrical safeguards.
• Compact unit with self-extinguishing ABS housing panel and IP55 protection rating plus circuit breaker on front of panel.
• Integrated PEGO thermo-regulator (Expert Nano 4CK).
• System status indicated by display.
• Key operated ON/OFF.
• Cold room light ON/OFF switch with key or by means of door switch.
• Key operated manual START/STOP defrosting.
• Clock for programmed defrost (RTC).
• Configurable multifunction output, alternative to the light output.
• RS485 serial connection with Modbus-RTU or Telenet protocol.