1001000VDX05
New product
A line of power and control boards for refrigeration systems with three-phase compressors up to 10 HP that provide complete cold room management. You can control the room light and the stand-by system using the buttons on the thermostat. Integrated PEGO thermo-regulator controls compressor, ventilation, defrosting and light. The unit also controls the door switch.
This product is no longer in stock
Warning: Last items in stock!
Availability date:
Main Function | Full cold room management |
User interface | Red led small (Nano series) |
Datalogger | No |
General protection | Fuses |
Compressor - type | Three phase |
Compressor - thermal protection | 11.0 - 16.0 A |
Product type | Electrical panel with electronics |
Condenser - type of fans | Single phase, Three phase |
Condenser - Total fan power | up to 2 x 1500 W - 1PH, up to 2 x 2000 W - 3PH |
Condenser - separated fans | Yes |
Evaporator- fans phases | Single phase, Three phase |
Evaporator - fans power | 1500 W (1 PH), 2000 W (3 PH) |
Defrost - type | With heaters / off-cycle |
Defrost - heaters phases | Three phase |
Defrost - heaters power | 15000 W |
Light - power | 800 W (AC1) |
Other characteristics | Door switch, Door heater, Compressor oil heater, RTC defrost (clock), Night mode function, Telenet Pego supervision |
• Designed to provide an immediate start-up and easy maintenance.
• Direct control of compressor, condenser fans, compressor oil element, defrost elements, evaporator fans, solenoid valve, door heater, room light and all standard-compliant electrical safeguards.
• Compact unit with self-extinguishing ABS housing panel and IP55 protection rating plus circuit breaker on front of panel.
• Integrated PEGO thermo-regulator (Expert Nano 4CK).
• System status indicated by display.
• Key operated ON/OFF.
• Cold room light ON/OFF switch with key or by means of door switch.
• Key operated manual START/STOP defrosting.
• Clock for programmed defrost (RTC).
• Configurable multifunction output, alternative to the light output.
• RS485 serial connection with Modbus-RTU or Telenet protocol.