A line of power and control panels for refrigeration systems with three-phase compressor up to 4 HP, for the complete management of cold room. Magnetothermic protection and motor circuit breaker for the compressor accessible from the front panel linked to an innovative form makes it a perfect and functional choice.
This product is no longer in stock
Warning: Last items in stock!
|Functions||Full cold room management|
|User interface||Red Led big (Base/Expert series)|
|Compressor - type||Three phase|
|Compressor - thermal protection||1.1 - 1.6 A|
|Product type||Electrical panel with electronics|
|Condenser - type of fans||Single phase|
|Condenser - Total fan power||up to 800 W|
|Condenser - separated fans||No|
|Evaporator- fans phases||Single phase|
|Evaporator - fans power||500 W|
|Defrost - type||With heaters / off-cycle|
|Defrost - heaters phases||Three phase|
|Defrost - heaters power||6000 W|
|Light - power||800 W (AC1)|
|Other characteristics||Pump-down / Thermostat (PD/T), Alarm relay, Door switch, Compressor oil heater, Telenet Pego supervision|
• Direct control of the compressor, condenser fans, compressor oil heater, defrosting heaters, evaporator fans, solenoid valve, room light and all standard-compliant electrical safeguards.
• General magnetothermic circuit breaker accessible from the front panel, which cuts the general power supply.
• Adjustable motor circuit breaker for compressor protection accessible from the front panel.
• Easy wiring on the internal terminal block.
• Selection of functioning mode for the compressor (pump-down / thermostat).
• Auxiliary relay with activation configurable by parameter.
• Transparent cover for access to magnetothermic circuit breaker, all with IP 65 protection rating.
• Electronic control with wide LED display and easy to use buttons.
• Signaling with LED icons of the plant status.
• RS485 for connection to TeleNET industrial supervision network or modbus-RTU standard protocol.