A line of power and control panels for refrigeration systems with three-phase compressor up to 7,5 HP, for the complete management of cold room. Magnetothermic protection and motor circuit breaker for the compressor accessible from the front panel linked to an innovative form makes it a perfect and functional choice.
This product is no longer in stock
Warning: Last items in stock!
|Functions||Full cold room management|
|User interface||Red Led big (Base/Expert series)|
|Compressor - type||Three phase|
|Compressor - thermal protection||5.5 - 8.0 A|
|Product type||Electrical panel with electronics|
|Condenser - type of fans||Single phase|
|Condenser - Total fan power||up to 800 W|
|Condenser - separated fans||Yes|
|Evaporator- fans phases||Single phase, Three phase|
|Evaporator - fans power||2000 W|
|Defrost - type||With heaters / off-cycle|
|Defrost - heaters phases||Three phase|
|Defrost - heaters power||9000 W|
|Light - power||800 W (AC1)|
|Other characteristics||Pump-down / Thermostat (PD/T), Alarm relay, Door switch, Compressor oil heater, Telenet Pego supervision|
• Direct control of the compressor, condenser fans, compressor oil heater, defrosting heaters, evaporator fans, solenoid valve, room light and all standard-compliant electrical safeguards.
• General magnetothermic circuit breaker accessible from the front panel, which cuts the general power supply.
• Adjustable motor circuit breaker for compressor protection accessible from the front panel.
• Easy wiring on the internal terminal block.
• Selection of functioning mode for the compressor (pump-down / thermostat).
• Auxiliary relay with activation configurable by parameter.
• Transparent cover for access to magnetothermic circuit breaker, all with IP 65 protection rating.
• Electronic control with wide LED display and easy to use buttons.
• Signaling with LED icons of the plant status.
• RS485 for connection to TeleNET industrial supervision network or modbus-RTU standard protocol.