110P30RVD403
New product
Control board for complete control of cold rooms with three-phase compressor up to 4 HP and Datalogger function.
This product is no longer in stock
Warning: Last items in stock!
Availability date:
Main Function | Full cold room management, Datalogger |
User interface | LCD (Plus series) |
Datalogger | Yes - 1 probe |
General protection | Magnetothermic |
Compressor - type | Three phase |
Compressor - thermal protection | 1.8 - 2.5 A |
Product type | Electrical panel with electronics |
Condenser - type of fans | Single phase |
Condenser - Total fan power | up to 800 W |
Condenser - separated fans | No |
Evaporator- fans phases | Single phase |
Evaporator - fans power | 500 W |
Defrost - type | With heaters / off-cycle |
Defrost - heaters phases | Three phase |
Defrost - heaters power | 6000 W |
Light - power | 800 W (AC1) |
Other characteristics | Pump-down / Thermostat (PD/T), Alarm relay, Door switch, Compressor oil heater, RTC defrost (clock), Night mode function, Printer connection, Telenet Pego supervision |
• Direct control of the compressor, condenser fans, compressor oil heater, defrosting heaters, evaporator fans, solenoid valve, room light and all standard-compliant electrical safeguards.
• General magnetothermic circuit breaker accessible from the front panel, which cuts the general power supply.
• Adjustable motor circuit breaker for compressor protection accessible from the front panel.
• Easy wiring on the internal terminal block.
• Selection of functioning mode for the compressor (pump-down / thermostat).
• Auxiliary relay with activation configurable by parameter.
• Transparent cover for access to magnetothermic circuit breaker, all with Ip65 protection rating.
• Control electronics with large backlit LCD and user-friendly keypad.
• Simultaneous display on LCD of ambient temperature, evaporator temperature, calendar and system status.
• Recording of ambient temperature and relative alarms (up to 1 year) with recorder independent from cold room system control.
• USB slot built into controller for data downloads.
• Software updating from USB.
• Defrosts can be carried out in real time clock mode.
• RS485 for connection to Modbus-RTU or TeleNET industrial supervision network.
• TeleNET software to download data on personal computer (provided free of charge with product).