ECP 2000 BASE4 VDE (cod.1102000BVDE3)
1102000BVDE3
New product
A line of control panels for cold rooms with three-phase compressor up to 20 HP, specially designed for complete cold room management. Protection of the loads and the auxiliary circuit with circuit breakers.
Data sheet
| Main Function | Full cold room management |
| User interface | Red Led big (Base/Expert series) |
| Datalogger | No |
| General protection | Magnetothermic |
| Compressor - type | Three phase |
| Compressor - thermal protection | 35.0 - 45.0 A |
| Product type | Electrical panel with electronics |
| Condenser - type of fans | Single phase, Three phase |
| Condenser - Total fan power | up to 2 x 1500 W - 1PH, up to 2 x 2000 W - 3PH |
| Condenser - separated fans | Yes |
| Evaporator- fans phases | Three phase |
| Evaporator - fans power | 6000 W (3 x 2000 W - 3PH) |
| Defrost - type | With heaters / off-cycle |
| Defrost - heaters phases | Three phase |
| Defrost - heaters power | 21000 W |
| Light - power | 800 W (AC1) |
| Other characteristics | Pump-down / Thermostat (PD/T), Alarm relay, Door switch, Compressor oil heater, Telenet Pego supervision |
More info
• Direct control of compressor, condenser fans, compressor oil heater, defrosting heaters, evaporator fans, solenoid valve, room light and all standard-compliant electrical protection devices.
• Protection of the loads and the auxiliary circuit with circuit breakers.
• Selection of functioning mode for the compressor (pump-down / thermostat).
• Compact, self-extinguishing ABS housing with IP65 protection rating and frontal circuit-breaker.
• Electronic control with wide LED display and user-friendly keypad.
• System status indicated by icons.
• RS485 for connection to TeleNET industrial supervision network or Modbus-RTU standard protocol.
• Alarm output with free-voltage contact to activate further warning devices such as siren or dialer.