110042BSUEE0001
New product
Line of electrical panels, with power and control of the stepper electronic expansion valve (stepper motor), dedicated to control only the three-phase evaporating unit where units are served by a central refrigerator or remote condenser unit.
This product is no longer in stock
Warning: Last items in stock!
Availability date:
Main Function | Evaporating unit management, Stepper electronic valve manag. |
User interface | Red Led big (Base/Expert series) |
Datalogger | No |
General protection | Magnetothermic |
Product type | Electrical panel with electronics |
Condenser - separated fans | Yes |
Evaporator- fans phases | Three phase |
Evaporator - fans power | 8000 W (4 x 2000 W) |
Defrost - type | With heaters / off-cycle |
Defrost - heaters phases | Three phase |
Defrost - heaters power | 42000 W |
Light - power | 800 W (AC1) |
Other characteristics | Alarm relay, Door switch, Door heater, RTC defrost (clock), Night mode function, Telenet Pego supervision, Aux relay 2, Stepper Electronic valve |
Applications
• Control of the evaporating unit, with electrical defrostup to 42 kW.
• Management of the motorized bipolar expansion valve.
Main characteristics
• Driver for the motorized electronic valve integrated in the cold room control.
• Single display for complete cold room management.
• Connectable to any type of stepper valve on the market.
• Including parameters self-configuration table based on the brand and model of the valve.
• Internal USB port for updates with new refrigerant gases.
• Enabling for condensing unit, defrost heaters, evaporator fans, solenoid valve, cold room light and presence of all the electrical protections required by regulations.
• Protection of the loads and of the auxiliary circuit with circuit breakers.
• Compact, self-extinguishing abs housing with IP65 protection rating and circuit breaker on the front of the panel.
• Electronic control with large LED display and easy-to-use keyboard.
• LED system status indicators.
• RS485 serial port for connection to the TeleNET industrial supervision network or standard Modbus-RTU protocol.
• Alarm output with voltage-free contact to activate other warning devices such as sirens or telephone dialer.