NANO 15 U VD (cod. 100U150X01)
100U150X01
New product
A line of power and electronic control boards for control of the three-phase evaporating unit only where devices are served by a compressor rack. You can control the room light and the stand-by system using the buttons on the thermostat. Integrated PEGO thermo-regulator controls cold, ventilation, defrosting and light calls.
Data sheet
| Main Function | Evaporating unit management |
| User interface | Red led small (Nano series) |
| Datalogger | No |
| General protection | Fuses |
| Product type | Electrical panel with electronics |
| Evaporator- fans phases | Three phase |
| Evaporator - fans power | 4000 W (2 x 2000 W - 3PH) |
| Defrost - type | With heaters / off-cycle |
| Defrost - heaters phases | Three phase |
| Defrost - heaters power | 15000 W |
| Light - power | 800 W (AC1) |
| Other characteristics | Door switch, Door heater, RTC defrost (clock), Night mode function, Telenet Pego supervision |
More info
• Designed to provide an immediate start-up and easy maintenance.
• Enabling for motor condenser unit, defrosting elements, evaporator fans, solenoid valve, room light, door element and all standard-compliant electrical safeguards.
• Compact, self-extinguishing ABS housing with IP55 protection rating and circuit breaker on front of panel.
• Integrated PEGO thermo-regulator (Expert Nano 4CK).
• System status indicated by display.
• Key operated ON/OFF.
• Cold room light ON/OFF switch with key or by means of door switch.
• Key operated manual START/STOP defrosting.
• Clock for programmed defrost (RTC).
• Configurable multifunction output, alternative to the light output.
• RS485 serial connection with Modbus-RTU or Telenet protocol.