200202EXPCS
New product
Control panel for cold rooms with single-phase compressor up to 2 HP, specially designed to provide safety, protection, control and easy-installation – all in one unit. It allows a complete control of all the components on a refrigeration system.
Version with NTC probes 1x1,5 mt. + 1x3 mt. included.
This product is no longer in stock
Warning: Last items in stock!
Availability date:
Main Function | Full cold room management |
User interface | Red Led big (Base/Expert series) |
Datalogger | No |
General protection | Magnetothermic |
Compressor - type | Single phase |
Compressor - thermal protection | Single phase - max 10A (2HP) |
Product type | Electrical panel with electronics |
Evaporator- fans phases | Single phase |
Evaporator - fans power | 500 W |
Defrost - type | With heaters / off-cycle |
Defrost - heaters phases | Single phase |
Defrost - heaters power | 3000 W |
Light - power | 800 W (AC1) |
Other characteristics | Pump-down / Thermostat (PD/T), Alarm relay, Door switch, Night mode function, Telenet Pego supervision, NTC probes included, Aux relay 2 |
Applications
• Complete control of single-phase static or ventilated refrigeration systems up to 2 HP, with off-cycle or electrical defrosting and direct or pump-down compressor stop.
• Control of evaporating unit only with freon solenoid or remote motor condenser enabling.
Main characteristics
• Direct control of compressor, defrosting heaters, evaporator fans and room light with live outputs directly connectable to the various devices or free voltage contacts for control of condensing unit with its own electrical panel.
• Built-in differential magnetothermic breaker for protection and cut-off of refrigeration unit.
• Innovative, stylish design. Lockable transparent cover for access to magnetothermic breaker, all with IP65 protection rating.
• 2 auxiliary relays with parameter-configured activation (alarm, temperature set-point, direct control via frontal pushbutton, door heater elements, remote motor condenser unit enabling, solenoid valve control enabling where compressor pump-down operation is applied, stand-by).
• RS485 for connection to TeleNET industrial supervision network or Modbus-RTU standard protocol.
• Easy installation and opening thanks to new hinged cover.