ECP 1000 BASE4 VD (cod.1101000BVDB1)
1101000BVDB1
New product
A line of control panels for cold rooms with three-phase compressor up to 10 HP, specially designed for complete cold room management. General protection with fuses.
Data sheet
| Main Function | Full cold room management |
| User interface | Red Led big (Base/Expert series) |
| Datalogger | No |
| General protection | Fuses |
| Compressor - type | Three phase |
| Compressor - thermal protection | 17.0 - 22.0 A |
| Product type | Electrical panel with electronics |
| Condenser - type of fans | Single phase, Three phase |
| Condenser - Total fan power | up to 2 x 1500 W - 1PH, up to 2 x 2000 W - 3PH |
| Condenser - separated fans | Yes |
| Evaporator- fans phases | Single phase, Three phase |
| Evaporator - fans power | 1500 W (1 PH), 2000 W (3 PH) |
| Defrost - type | With heaters / off-cycle |
| Defrost - heaters phases | Three phase |
| Defrost - heaters power | 12000 W |
| Light - power | 800 W (AC1) |
| Other characteristics | Door switch, Compressor oil heater, Telenet Pego supervision |
More info
• General protection with fuses..
• Direct control of compressor, condenser fans, compressor oil heater, defrosting heaters, evaporator fans, solenoid valve, room light and all standard-compliant electrical protection devices.
• Compact, self-extinguishing ABS housing with IP65 protection rating and frontal circuit-breaker.
• Electronic control with wide LED display and user-friendly keypad.
• System status indicated by icons.
• RS485 for connection to TeleNET industrial supervision network or Modbus-RTU standard protocol.